Cashmerette’s Concord T-Shirt

Disclaimer: I am a pattern tester for Cashmerette and received this pattern for free. All my opinions are my own. I’m also under no obligation as a tester to post a review to my blog.

If you’ve been following along for a while, you know I’ve been on the hunt for tops patterns that work well for me. I’m kind of picky about tops, it’s true. I want something loose-fitting at the hips, long enough to go over my booty so I don’t have to worry about pulling the shirt down at any point in the day, nicely fitted with negative ease over my bust, and not wonky at the armsyce.

Of course, I didn’t tell anyone that my hunt was over when I tested the Concord t-shirt a few months ago. I did keep to my plan of making the StyleArc tops and I do really love the Cate’s cousin top. My Eva top is growing on me… I wanted to say last time that for my next Cate’s Cousin top I will be using the curved hem from the Concord t-shirt, because I adore it. And for the Eva top, I wanted to say I had a much better v-neck top to make with the Concord. But I am a good pattern tester, because I was quiet and kept it a secret. *pats self on back* After I get back from the trip, I will probably sew a few more of the Concord t-shirts. It’s a great pattern for a quick project.

For the fuller figure, there is actually not a lot of options for t-shirts, especially when you enter my size range. I certainly haven’t found one that has cup sizing.

When Jenny sent off the information for the Concord t-shirt, I was pretty excited. The great thing about the Concord is all the options: hem length can be cropped, mid, or long curved, sleeve length can be short, 3/4 length, or long (plus the short or 3/4 length can have sleeve tabs and all lengths can either be hemmed or have sleeve bands), and, finally, the neckline can be high, scoop, or v-neck. You get one pattern with a ton of options in it and that is my dream t-shirt.

Another amazing thing about the Concord t-shirt is that it includes cup sizes C/D, E/F, G/H and can fit women from 40 inch bust / 32 inch waist / 42 inch hip to 58 inch bust / 48 inch waist / 58 inch hip. It’s meant to have negative ease across the bust and skim the hips with a bit of positive ease (an inch or less).

My measurements are 51 inch bust / 46 inch waist / 56 inch hips. I chose to make a size 22 C/D graded to a size 26 at the hips for my tester version and then for my others I used the G/H cup size due to some wrinkles at the arm above the bust at the armsyce. I could have just graded to a 24 or left it at a 22, but I like it pretty loose around the hips for my booty.

For my two tester versions, I used the scoop neck and 3/4 length sleeves. One version was mid-length and the other the long curved hem.

DSC_2011 DSC_2013 DSC_2012

I love my test versions. I even made my mom a Concord t-shirt for her birthday in March using the tester pattern:

20160313_151102

I made her a straight size 16 C/D with a scopped neck and a longer short sleeve since she likes to have her upper arms covered. I made it in her favourite colour. Like mother, like daughter! I wish I had saved some of this gorgeous pink fabric for myself, but I’m sure I will be able to get some more from Fabricland. I did make my Eva top with it. I just wish I had made a Concord t-shirt with it. 😉

Once Jenny sent me the final version, I knew I was going to make up several more tops. I had a bunch of fabric set aside for them. I chose to make the larger G/H cup size to get an even better fit and still grade up at the hips.

DSC_2004 DSC_2009

I made two with the long curved hem and a v-neck. On the left, is the 3/4 length sleeve with tabs. On the right is a long sleeve with a band. Of note, the printed fabric is a mid-weight rayon jersey and is quite weighed down. It was difficult to sew with and resulted in some waviness in the hem as well as a lower hem than the shirt on the right. I might resew the hem using stay tape at a future date, but for now I am leaving it. My sewing machine seems to hate mid-weight rayon jersey for some reason. To be honest, I think I am probably going to be needing a new sewing machine in the next year, because the problems keep multiplying with it… The rest of the fabric I used is a lightweight poly rayon spandex jersey and is my preferred material for tops. It’s a dream to sew with and presses so nicely.

DSC_2008 DSC_2007

DSC_2014 DSC_2015

For these two versions, I made short sleeves with bands. The blue one has sleeve tabs and the neckline is high. On the back, I made a scoop neck for fun and like it, but it does pull the shoulder forward a bit unfortunately. The blue shirt is a cropped length but hits me just above my full hip. I am 5’4″ and short-waisted. I can certainly shorten it to make it cropped but am okay with this length. The black has a long curved hem, no sleeve tabs, and the neckline is scooped. You probably guessed by now that is my favourite hem style in this shirt considering 4 out of 6 of mine have the curved hem. It’s long enough to fit over the bum and never have to worry about it riding up.

Construction was easy. The curved hem is done before the sleeves and side seams. The neckline is actually the second thing you do after the shoulder seams. It makes it a lot easier doing it in that order without all the rest of the bulk of the sleeves in the way. The sleeve tabs are sewn on to the sleeves before the sleeve is attached in the flat. Final steps are to sew a button through all the layers to permanently attach the tab. You could add a buttonhole to the sleeve tab, if you want.

Instructions are very easy to follow. The pattern is labeled as beginner and I think that fits. I mostly used my serger for constructing all the shirts, except for top stitching the curved hem or sewing the hems for sleeves or the bottom. The tabs are sewn on with a regular sewing machine and the v-neck is started with a regular sewing machine. I also topstitch all my neckbands down with a zig zag stitch, because I truly hate twin needles and so does my ornery machine. You can construct it entirely on a sewing machine if you don’t have a serger.

I love the fit of the shirt. I could maybe use a narrow shoulder adjustment like with any pattern, but I don’t mind where the shoulders sit on this top.

The pattern is already a TNT for me with six versions for myself. I absolutely adore it and have been waiting for a basic t-shirt with all of these options for a while in my size range. The size range is great and the cup sizing is a dream. You can see how the change in the cup sizes made the fit a lot better for me removing the wrinkling at the armsyce above the bust. A lot of people don’t want to bother with an FBA in a knit garment and, with the cup sizes, you are less likely to have to do one. I really love all the options in this t-shirt and think it offers a lot in a small package.

Concord t-shirts have been popping up a few places so far. Check out Tanya’s, Meg’s, and gMarie’s versions! Now I need a striped one, an orange one, and a fun patterned one. All the Concords!

TL:DR Review

  • Pattern: Cashmerette Concord T-Shirt
  • Pros: Cup sizing, many options, goes up to a 58 inch hip. So much to love.
  • Cons: Um…. smaller sized people miss out? In other words, I can’t think of a con…
  • Make again?: Absolutely. It’s the t-shirt pattern I’ve always wanted.
  • Rating: pink-star-black-mdpink-star-black-mdpink-star-black-mdpink-star-black-mdpink-star-black-md5/5 stars