Seamwork Jill Coatigan

And now for something completely different…

The last time I made a Seamwork magazine pattern it was a complete and udder (HA!) disaster with the Florence bralette pattern. I would still love to find a bralette pattern that works for my bust size (gargantuan). That experience definitely turned me off of the patterns, but then I started thinking that maybe I might perhaps….. try another.

I’m not extolling the virtues of Seamwork or Colette, but my Jill Coatigan did work out very well. I had bought some other patterns before I made the Florence bralette. I also ended up getting the Audrey jean jacket. Of course, the patterns are very tempting because they go up to a 54 bust and 58 hip. But are they actually worth it? Colette gets some pretty warrented criticism from the sewing blog community for their drafting, especially in the sleeves.

I took the plunge, though, because I wanted a boxy coat for the Spring and really wanted to use some wool knit I had in my stash for the project. Megan and I spoke and decided to do a Same Pattern, Different Bodies for the CSC for the Curvy Year of Sewing theme of jacket/blazer for March/April. You can read more about Megan’s coat here. All of these things kind of meant I was committed to another Seamwork pattern.

  

In spite of the loose fit for this pattern, the arms were still going to be a bit tight for me. They would have *just* fit so I added 2 inches there and had to add a bit to the side seams to accomodate. I also initially shorted the pattern by 7 inches. I am 5’3″ and regularly have to shorten patterns quite a bit. 7 inches would have meant the pattern would hit my mid-thigh. But then due to fabric constraints, I needed to shorten further to get the pattern to fit because I *had* to use this fabric. I think in total it is shortened by about 15 inches. If I were to make it again, I would go with the 7 inches instead.

In terms of fit, it fits as boxy and loose as the pattern suggests. I made a 2XL. The arms are a bit long but I do prefer jackets and coats and cardigans and long sleeves in general to be long on me to protect my always cold hands.

Things I didn’t like about the pattern are the slightly curved seam at the front. Comparing the curvy block to the regular block, the curve is a bit more in the curvy block. With the curve going up to the centre front, it doesn’t make any sense to me since it then doesn’t look like a straight hem from the side view. My bust pulls it up further as well. If I make this again, I will definitely be correcting that.

The instructions were so strange in some places. It suggests top stitching the facing down but then it would show from the right side in places so I noped that. It’s a simple pattern and would work for a beginner, but some instructions might be tough for them to understand and could be done in an easier way. So for the most part, I ignored them.

I started off by binding all my seams with a bright green cotton bias tape. I sort of abandoned that after a bit because I found the process tedious. Do you ever do that mid-sewing? The back seam/kick pleat and the edge of the facing all are bound, but the rest is finished with my serger instead.

 

The main fabric is a grey floral knit with a stripe on the wrong side. The floral shows on the collar facing but I used the stripe for the main parts. I liked the floral but not enough to make it the main look. I added a belt and belt loops to the coat. I used a darker grey wool coating for the tie and the pockets for a bit of contrast…..hahahha because I ran out of fabric. Luckily, I had some in my stash from a trade a while back so my lack of fabric worked out okay.

 

I love the look of the tie and those pockets are enormous and can fit anything in them. I put my kindle in it as well as some cards during a respiralogist appointment recently. Very useful.

The other good thing about the pattern is that it is quick to cut out and quick to make. It is pretty satisfying to have a pattern like that. I think you know by now that I enjoy quick projects. I do love an involved one, but definitely need a few quick ones in between those.

 

What more can I say? I love the coat. It’s great for this in-between weather and an alternative to my Pepernoot coat that I made 2 years ago.

Before I finish this post, a quick update on my health. My new respiralogist has been amazing (I literally cried in his office after he promised he would get my cough managed). He put me on some new meds and increased others and my cough has improved dramatically. Initially, I thought I might need to return to him sooner for an appointment because my cough was bad for about a month with the transition of the new meds, but it just started going away and now I cough only if I forget my meds. At the first appointment, I was using 80% of the normal lung capacity. Now I am at 120%, because I am a major overachiever. 😉

Of course, the disclaimer to this update is that while one part is more managed by medication, other parts of my chronic illness are not and I am still a person who lives each day with health issues and chronic pain. The thing about devoting all my time to breathing normally is that it allowed me to ignore or push aside the pain. Now that I can breathe again without coughing fits, I am noticing the pain more and how much it has increased in the past year. I have a growing instability in my lower spine and my left hip (my right hip has a labrum tear so it is always in pain), and my costochrondritis is flaring horribly making deep breaths extremely painful. But I take the breathing again as an extremely amazing victory! And knowing I have remarkable lung capacity for a person of my age, weight, and height, is fantastic news! Yeay lungs! When they work, they sure make breathing easier! 😀

TL:DR Review

  • Pattern: Seamwork Jill Coatigan
  • Pros: Simple pattern with a good size range. Great for beginners who need a gateway drug into coatmaking.
  • Cons: Instructions are a bit weird and could be improved. Strange curved front hem….
  • Make again?: Absolutely after a couple more adjustments and in the mid-thigh length. How many coats does one need? Well, quite frankly, I think all the coats would be the answer. ❤ I have a tan non-stretch knit that would work well for this pattern so I will probably use that for another version since it sews up pretty quickly.
  • Rating: pink-star-black-md pink-star-black-mdpink-star-black-mdpink-star-black-md4/5 stars

While I’ve been gone

It’s been a while since I posted. I’ve been busy with a lot of pattern testing that I can’t share yet and a costume project that I can share, but didn’t take many pictures of, and a few other smaller projects one of which I will share in a different post.

20180207_221522

For the costume project, I took apart a suit and two jumpsuits to make them tearable for a friend’s sketch show. This is the only picture I took, but it reminds me of Flat Stanley and makes me giggle a lot. The suit ultimately needed to be made into a jumpsuit and then the front needed to tear away from the back.

My old Brother SQ9050 kind of died after this project. I broke about 10 needles during the project and it struggled through every bit of it. Afterwards, the feed dogs just stopped working completely. RIP Jane Eyre. Rochester, my serger, will be in mourning forever… I do want to see if I can fix Jane so I can use her as a backup machine or even use the different stitches. I don’t want to take her into a shop, though, so it would be purely DIY. I did that with my serger at one point and fixed the timing. I think the connection to the feed dogs is probably where to look. And I looked briefly at the Brother site and saw that parts are available including new feed dogs.

20180306_143405

Meet Brienne of Tarth. She’s a Singer Heavy Duty 4452 that I purchased off Amazon.

Brienne of Tarth is aptly named because she is a workhorse and can take anything I throw at her. She has a metal frame and a fast motor meaning I can go up to 11,000 stitches per minute. So far, I love this new machine. Moving from a computerized to a manual machine is a bit of a learning curve, but not impossible. My first machine was manual, but I didn’t really remember a lot from that time. I also think I didn’t really learn what I could about the stitch settings and am taking my time to learn with this new machine. I thought at one point I would save up to get a Pfaff, but I think that is out of range for now. The positive of this machine is that is extremely affordable. I’ll do a full review after I work with it for some more time, but so far is is doing a far better job than my Brother ever did.

I started off with a simple project of some fabric bins for the first project with Brienne.

20180307_211139

I used this tutorial on Birch Fabrics to make them for my friend. I did change the shape slightly into a rectangle due to a cutting error, but I love the rectangular shape. I also used fusible foam instead of a heavy interfacing so they stood up better. I have fabric and foam left to make myself a couple of fabric bins.

This past weekend, I made a Concord top and redid my tester version of the Belmont leggings so they fit and I cropped them off in hopes that Spring may arrive here some day…

20180310_200012

The fabric is a bamboo jersey and is quite lovely. Grey seems to be a theme lately with me since I just cut out another grey project and have two others planned. I’m not entirely in love with the colour or lack of colour, but can see potential for layering and pairing with obnoxiously bright neon colours. I am also working on a grey Seamwork Jill Coatigan:

20180313_160752

The fabric is a gorgeous heavy wool knit blend with stripes on one side and floral on the other. I decided to go with the stripes on the outside, but have the floral showing on the collar. I ran out of fabric as well so I had to cut the pocket and the tie I decided to add from a dark wool. To make the whole thing less blah, I will be finishing the inside seams with a lime green bias tape made from the fabric in the bins above. 😀 I shortened the coat by about 10 inches for two reasons: 1) I am super short (5’3″ at last measuring) and the hem would have hit me at mid calf when it is supposed to hit mid-thigh; 2) And then when I was cutting it out…. I had to shorted it again to get the main pieces to fit on the fabric and they *just* fit. This actually might hit me mid-thigh now…which makes me wonder if they made the pattern for a person with Brienne’s proportions… I’m excited to share this later on this month on the CSC and then again here. Cross your fingers it all goes well.

I also recently made a new knit dress, but I will share that in a different post. 🙂

In other news, I received my first sewing magazines in the mail from Ottobre. The CSC editors were offered them for free. I have a few favs from them and at the top is that pink babydoll dress on the right hand cover of the Spring/Summer 2018 issue. I just have to get some tracing paper and then I should be ready to go.

20180218_114646

I have some pretty intense costume projects coming up for improv performances at festivals in the summer and early fall. I will need to plan them out and I’ll share the process here. It’s pretty exciting, actually, since we have a costume budget! But it is a budget so I will have to think carefully of the plans for it. After all the costumes are created, we can use them for more festivals in the future as well as runs of our improv shows. The troupe is pretty excited about all that. Speaking of the troupe, if you are at Toronto Comicon this weekend, check us out: